Apr 12, 2022 Zostaw wiadomość

Analiza zjawiska znakowania wodnego folii ochronnej do profili elektroforetycznych

Aluminium elektroforetyczne to tlenek glinu pełniący rolę anody, umieszczany w roztworze emulsji rozpuszczalnej w wodzie- za pomocą prądu stałego, sztucznie osadzany na powierzchni warstwy ochronnej powłoki tlenku glinu w celu wytworzenia aluminium elektroforetycznego.

Główne cechy wysokogatunkowego- aluminium elektroforetycznego:

1. Ma silną twardość powłoki malarskiej.

2, z folią o wysokiej przyczepności, niełatwo spaść na starzenie.

3. Ma silniejszą odporność na warunki atmosferyczne i odporność na alkalia niż tlenek glinu.

4, kolor powierzchni jest bogaty, piękny, z lustrzanym- efektem połysku.

Profile elektroforetyczne są bardziej odpowiednie do użytku na zewnątrz, zgodnie z krajowymi standardami 70-letniej odporności na warunki atmosferyczne, podstawowe drugie zabijanie innych rodzajów obróbki powierzchni.

Electrophoretic profile packaging materials are mostly used for strong adhesion film as a protective film, aluminum profiles in a protective film for a period of time, the film is torn to find that aluminum profiles have film printing or called watermark. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarks has appeared in almost all aluminum factories, and there are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared.

Film watermarking is a common phenomenon, film such as air separation, and moisture formation, which has been recognized in the industry. Many factories have also done a large number of relevant experiments. There are several considerations:

1 eksperyment procesu krzepnięcia

180 degrees 30 minutes basically appear watermark boundary, 200 degrees 10 minutes effect is also better than 180 degrees 30 minutes effect. So the temperature and time is quite key, especially in the case of heat will fade the coloring way, must be integrated to weigh the curing process and color.

2 lepkość folii ochronnej i eksperyment z rozpylaniem wody;

There were watermarks 24 hours after spraying film for both high viscosity and medium viscosity, while there were almost no watermarks 24 hours after spraying film for low viscosity. It shows that the viscosity of the membrane has a great relationship. But there is a phenomenon, if sprayed with pure solvents such as alcohol, there is no watermark on any viscosity. The author cannot find a reasonable explanation for this phenomenon. I'll leave that to the right person.

3. Problemy z roztworem zbiornika do elektroforezy

Powyższe wynika tylko z analizy wyników, ale sposób rozwiązania problemu w innej fabryce skłania autora do rozpoznania kierunku zasadniczego problemu.

It is also a watermarking problem, but the delivery is urgent, and the change of low viscosity protective film is not guaranteed to be a problem, but also to observe the time. The workshop director decided to rearrange the electrophoresis tank. (Pull out to empty slot, can be added later). The process was not changed and the problem disappeared. I can't remember any new grooves having similar problems.

Poniższe jest tylko wnioskowaniem. Sprzęt będący własnością autora nie może obecnie obsługiwać weryfikacji.

In electrophoresis, only the solvent can not be tested. It can be inferred from the above phenomenon that the solvent is reduced, and the principle of recovery equipment is to filter water and solvent from the main tank to water washing, and the solid components of water washing return to the main tank, and achieve the purpose of recovery. The volatile nature of the solvent and the lack of laboratory equipment, resulting in the failure to quantify the proportion of solvent imbalance.

Brak równowagi rozpuszczalnika może spowodować uszkodzenie zwartości i jednorodności warstwy farby oraz spowodować wnikanie wody do warstwy farby, co powoduje powstawanie znaku wodnego.

Podsumuj powyższe trzy punkty, miej nadzieję, że podobne przypadki można porównać, aby znaleźć problem.


Wyślij zapytanie

whatsapp

Telefon

Adres e-mail

Zapytanie